AESSEAL® offers a range of bearing protection devices suitable for most applications. The innovative LabTecta® and MagTecta™ products include patented features that deliver the best possible bearing housing sealing solution for your motor, pump, plummer block, gear boxes or steam turbine.
Bearing contamination has been found to be responsible for almost 21% of rotating equipment failures. The majority of bearing failures are due to contamination of the bearing oil as a result of water or particulate ingress into the bearing chamber. This contaminant ingress is preventable using todays advanced bearing protection devices. These devises offer ingress protection up to IP69K ensuring all particulate and moisture are kept out of the bearing oil even in the most arduous environments. In addition these devises are non-contacting in operation ensuring expensive rotating equipment shafts are not damaged.
The LabTecta® product range is an advanced labyrinth design that offers ingress protection of IP66 as standard and up to IP69K (with the LabTecta OP). The design is non-contacting and does not wear the machinery shaft. The advance labyrinth design allows the bearing housing to breath out when the shaft is rotating but seals when the shaft stops.
The MagTecta™ product range uses a magnetically energized contacting faces. The design protects from both external contamination and loss of lubrication and is especially suited for oil mist (pure mist) applications. The design is non-wearing and requires no routine maintenance.
Upgrading your rotating equipment with AESSEAL® bearing protection is the most cost effective upgrade you can perform that will deliver increased equipment reliability with no routine additional maintenance. AESSEAL® bearing protection devices are available with ATEX hazardous area certification.
For more information on Bearing Protection
Find out how to save your bearings and improve your reliability. View our helpful video > Eliminate 52% of bearing-failures
For a quick view of all products, use the > Product index
LabTecta 66
IP66 certified designs that conform to IEEE Std. 841-2021
LabTecta 66AX
Designed and engineered for axial movement applications
LabTecta 66FS
Designed to seal oil flooded bearing chambers
The LabTecta 66FS incorporates recognised lip seal technology. Offering better protection against contamination ingress.
LabTecta 66IAP 66OAP
Engineered Solutions with Positive Air Purge
Designed to prevent contamination even in extreme environments
LabTecta 66KSB
Products to suit KSB CPK Pumps
Proven to increase equipment reliability in KSB CPK pumps. Designs which conform to IEEE Std. 841-2009 for electric motor bearing protection.
LabTecta 66PB
Plummer/Pillow Block Bearing Protection
Provides constant pressure on the static elastomer to provide positive sealing
LabTecta 66RDS
Radially Split Design For Easy installation
The only radially divided bearing protector available with rotor / stator static sealing technology as standard.